Onkyo TX-RZ920 vs Pioneer VSX-534D

Here we are comparing Onkyo TX-RZ920 to Pioneer VSX-534D to reveal their common strengths and weaknesses as well as the differences between them which will help you in making a correct decision before the purchase. The Onkyo TX-RZ920 has 9 channel and the Pioneer VSX-534D has 5 channel amplifiers.

Onkyo TX-RZ920	Pioneer VSX-534D
Onkyo TX-RZ920 was introduced in 2017. It is equipped with 9 channel amplifier with 135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 11.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.	Pioneer VSX-534D was introduced in 2019. It is equipped with 5 channel amplifier with 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) power per channel and is capable of 5.1 maximum channel processing. It supports Dolby Atmos and DTS:X, passes 4K/60Hz and upscales 1080p to 4K video signal.

We evaluated Onkyo TX-RZ920 and Pioneer VSX-534D and gave them scores of 92 and 78 out of 100 recpectively. Our ranking system is based on the amplifier specifications, audio and video features, connectivity, multizone capabilities, radio and many other details.

For more details about the ranking please go to    Evaluations section.

This section shows those features and specifications which are the reason to choose Onkyo TX-RZ920 over Pioneer VSX-534D.

	Onkyo TX-RZ920	vs	Pioneer VSX-534D
More Channels	9.2	vs	5.2
Higher Power Output	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	vs	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
THX™ Certification	Select™ (previously known as Select2)	vs
Bi-amp capability		vs
Higher DAC Specs	384 kHz/32 Bit for Front L/R 768 kHz/32 Bit for Other Channels 192kHz/24 Bit for Zone 2 and Zone 3	vs	384 kHz/32 Bit
More Channel Processing	11.1	vs	5.1
Jitter Reduction	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio	vs
Virtual Speakers	T-D (Theater-Dimensional)	vs
Enhanced Audio Return Channel (eARC)	via future firmware update	vs
Analog To HDMI Upconversion	Component**, Composite	vs
Wi-Fi		vs
Chromecast Built-In		vs
Works with SONOS	requires firmware update & Sonos Connect	vs
DTS Play-Fi		vs
DLNA 1.5		vs
AirPlay	AirPlay 2 after firmware update	vs
More HDMI Inputs	8 (1 front)	vs	4
More HDMI Outputs	2 (1 Main, 1 Sub/Zone2)	vs	1
USB Input	1 (Rear)	vs
More Optical Inputs	2	vs	1
More Coaxial Inputs/Outputs	2	vs	1
More RCA Line Inputs	6	vs	3
Phono Input		vs
More RCA Pre-Outs	11.2	vs	0.2
More Composite Video Inputs	2	vs
More Component Video Inputs	2	vs
Ethernet		vs
Front A/V Inputs	HDMI	vs
Detachable Power Cord		vs
More Zones	3	vs	1
RS-232C Interface		vs
+12V Trigger Output	2 (A: 100 mA, B:25 mA)	vs
Remote (IR) Input/Output	1 / 0	vs	0 / 0
Analog Tuner	FM/AM	vs	FM with RDS
Internet Radio	TuneIn	vs
Pandora		vs
Spotify		vs
Tidal		vs
Deezer		vs
Solid Aluminum Front		vs
More Speaker Terminals	11	vs	5
More Large Speaker Terminals	11	vs	2
Higher Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA)	250 W (10% THD)	vs	150 W (10% THD)
Higher Dynamic Power per Channel, 3 Ω, Front)	320 W	vs	160 W
Higher Dynamic Power per Channel, 4 Ω, Front)	270 W	vs	125 W
Higher Dynamic Power per Channel, 8 Ω, Front)	160 W	vs	85 W
Lower THD	0.04% (1 kHz, 100 W, 8 Ω)	vs	0.08% (20 Hz - 20 kHz, half power)
Longer Warranty	3 Years	vs	1 Year Parts & Labor

This section shows those features and specifications which are the reason to choose Pioneer VSX-534D over Onkyo TX-RZ920.

	Onkyo TX-RZ920	vs	Pioneer VSX-534D
Dolby Atmos Height Virtualization		vs
DTS Virtual:X		vs
Dialog Enhancement		vs
USB DC Out Port		vs
Digital Radio		vs	DAB/DAB+
Bigger Power Supply	310 W	vs	465 W
Higher Rated Headphone Power Output	55 mW (32 Ω, 1 kHz, 10% THD)	vs	80 mW (32 Ω, 1 kHz, 10% THD)
Higher S/N Ratio (Line, IHF-A)	107 dB	vs	109 dB
Newer Bluetooth Version	4․1 + LE	vs	4․2

We already listed pros and cons of each model. However, you may also find useful to look at their common strengths and weaknesses shown side-by-side.

STRENGTHS	Onkyo TX-RZ920	Pioneer VSX-534D
Dolby Atmos
DTS:X
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Auto Speaker Calibration System with Mic.	AccuEQ with AccuReflex™	MCACC
HDR10
Dolby Vision
New HDCP Version	2.2	2.2
Bluetooth	SBC, AAC	SBC, AAC
Analog Tuner	FM/AM	FM with RDS

WEAKNESSES	Onkyo TX-RZ920	Pioneer VSX-534D
No IMAX Enhanced
No Auro 3D with Auro-Matic Upmixer
No HDR10+
No 8K Passthrough	up to 4K/60p (RGB/YCbCr4:4:4)	up to 4K/60p (YCbCr 4:4:4)
Does not Work with Amazon Alexa
Few 8K Inputs

Onkyo TX-RZ920	Pioneer VSX-534D
9 channel Amplifier: Onkyo TX-RZ920 features 9 channel power amplifier. It is rated at 135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.	5 channel Direct Energy Amplifier: Pioneer VSX-534D features 5 channel power amplifier with Direct Energy design. It is rated at 80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven) and is able to drive 4 ohm speakers.

• Dynamic Audio Amplification: Onkyo TX-RZ920 features Dynamic Audio Amplification which is Onkyo’s amplification philosophy that focuses on capturing the energy and dynamism contained in the audio signal and reproducing it without loss. Audio signals are not static like a test tone, but rather a countless collection of constantly moving waves. While static measurements such as S/N ratio and Total Harmonic Distortion are important, Onkyo believes that excellent dynamic and transient response is the key to emotionally involving sound. Dynamism - the “life” in music - is achieved when the amp can respond to changes in the signal instantaneously, so notes start and stop naturally and the nuances in attack, decay, sustain, and release are voiced with conviction. Onkyo home theater receivers represent the culmination of almost 70 years’ experience in amplifier design. The unique elements of their amplification system comprise high-current, low-impedance architecture to accurately control large speaker cones while enabling instantaneous response to dynamic changes, and discrete wide-range amplifier circuit topology to eliminate phase shift for clear and accurate audio imaging.

THX™ Select™ (previously known as Select2) certification

Onkyo TX-RZ920 is THX™ Select™ (previously known as Select2) certified. This means that it is for medium sized rooms, up to 2,000 cubic feet in size, with a 10-12 foot viewing distance from the screen.

AMPLIFIER	Onkyo TX-RZ920	Pioneer VSX-534D
Channels	9.2	5.2
Power Output	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Bi-amp Capability

Onkyo TX-RZ920's and Pioneer VSX-534D's amplifiers can be assigned for different speaker configurations.

• Dolby Atmos Configurations: The following speaker configurations are supported for Dolby Atmos:
Onkyo TX-RZ920: 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Pioneer VSX-534D: 3.1.2 with internal amplifier.
• DTS:X Configurations: The following speaker configurations are supported for DTS:X:
Onkyo TX-RZ920: The speaker configurations for DTS:X are the same as for Dolby Atmos - 5.2.2, 5.2.4, 7.2.2 with internal amplifier and 7.2.4 with addition of external 2 channel amplifier.
Pioneer VSX-534D: The speaker configurations for DTS:X are the same as for Dolby Atmos - 3.1.2 with internal amplifier.
• Configurations without height channels: There are also other speaker configurations available which do not include height channels:
Onkyo TX-RZ920: 5.2, 7.2 with internal amplifier.
Pioneer VSX-534D: 5.2 with internal amplifier.
• Bi-Amp: Onkyo TX-RZ920 is able to bi-amp up to 2 main channels simultaneously. During bi-amplification two amplifiers are used for one speaker. One amplifier powers the midrange and tweeter section of the speaker and another amplifier powers the low frequency woofers. Each amplifier is less loaded and performs better. In order to use this feature speakers must have 2 pairs of connectors.

Dolby Atmos

Onkyo TX-RZ920 and Pioneer VSX-534D support Dolby Atmos.

• Dolby Surround Upmixer: Both models support Dolby Surround Upmixer. If the content is not mixed in Dolby Atmos then the Dolby surround upmixer will expand the audio to all channels including ceiling speakers. The upmixer has replaced the Dolby Pro Logic II family with improved upmixing algorithms.
• Dolby Atmos Height Virtualization: Pioneer VSX-534D supports Dolby Atmos Height Virtualization which is a digital signal processing solution that leverages Dolby's deep understanding of human audio perception to create the sensation of overhead sound from the listener-level speakers.

DTS:X

Onkyo TX-RZ920 and Pioneer VSX-534D support DTS:X.

• DTS Neural:X: Both models feature DTS Neural:X which is an advanced upmixer that can take non DTS:X content and upmix it to the DTS:X speaker layout. It has replaced the DTS Neo family with improved flexibility.
• DTS Virtual:X: Onkyo TX-RZ920 supports DTS Virtual:X which bridges the gap between DTS:X codec and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. If you have a limited speaker setup you will miss a full immersive potential of your entertainment system. DTS Virtual:X adds height and surround audio effect to your system without adding height speakers. It works with multiple configurations and delivers immersive sound experience out of 5.1 or even 2.1 speaker layouts.
• DTS Dialog Control: Both models have DTS Dialog Control. This function adjusts the dialog levels during playback of the DTS:X stream. It allows you to separately increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.

AUDIO DECODING	Onkyo TX-RZ920	Pioneer VSX-534D
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES		Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer

Onkyo TX-RZ920 comes with 8 HDMI inputs. It has 2 outputs - 1 Main and 1 Sub/Zone2.

Pioneer VSX-534D comes with 4 HDMI inputs. It has 1 output.

• 4K/60Hz Passthrough: On both receivers all inputs pass up to 4K/60p (RGB/YCbCr4:4:4) video signal.
• 4K Upscaling: Both receivers can upscale 1080p to 4K from HDMI sources. Onkyo TX-RZ920 can also upscale from analog sources.
• Analog To HDMI Upconversion: Onkyo TX-RZ920 supports analog to HDMI Upconversion, so you can input your analog video sources and output them digitally via HDMI. This means that you will need only one HDMI cable to connect to your TV.
• BT.2020 Color Space: BT.2020 or Rec. 2020 is a color standard which delivers a wider color gamut compared to Rec. 709. It covers approximately 75% of the total visual spectrum while the Rec. 709 covers only 35% (available on both models).
• HDCP 2.2 Copy Protection: Both receivers are HDCP 2.2 compliant which is a requirement for 4K/HDR copy-protected content transmission.
• 3D Ready: Both receivers are able to pass 3D video through HDMI.

HDR (High Dynamic Range)

Both receivers support HDR10, Dolby Vision and Hybrid Log-Gamma. High dynamic range video has greater dynamic range than standard dynamic range (SDR) video with brighter whites and deeper blacks. The result is greater contrast and more details in dark and bright areas, better color and depth.

Enhanced Audio Return Channel (eARC)

Onkyo TX-RZ920 supports Audio Return Channel (ARC) which allows the compatible TV to send audio signal to the a/v receiver through the same HDMI cable which is used to send audio and video signals to the TV. So one HDMI cable is used to transfer audio signal in both directions. New Enhanced ARC will support uncompressed audio formats such as Dolby Atmos, DTS:X, Dolby TrueHD and DTS HD Master Audio whereas the previous ARC could support only Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

VIDEO FEATURES	Onkyo TX-RZ920	Pioneer VSX-534D
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)	via future firmware update
HDCP Version	2.2	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K/60p (RGB/YCbCr4:4:4)	up to 4K/60p (YCbCr 4:4:4)
Video Signal Upscaling	1080p to 4K	1080p to 4K

TERMINALS	Onkyo TX-RZ920	Pioneer VSX-534D
HDMI Inputs	8 (1 front)	4
HDMI Outputs	2 (1 Main, 1 Sub/Zone2)	1
8K Inputs
USB Input	1 (Rear)
USB DC Out Port
Optical Inputs	2	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	6	3
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	0.2
XLR Pre-outs
Composite Video Inputs	2
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	2
Component Video Outputs

GENERAL	Onkyo TX-RZ920	Pioneer VSX-534D
Brand	Onkyo	Pioneer
Model	TX-RZ920	VSX-534D
Type	A/V Receiver	A/V Receiver
Country	North America	Europe
Release Year	2017	2019
Predecessor	Onkyo TX-RZ900	Pioneer VSX-532

AMPLIFIER	Onkyo TX-RZ920	Pioneer VSX-534D
Channels	9.2	5.2
Power Output	135 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)	80 W (8 Ω, 20 Hz - 20 kHz, 2 channel driven)
Front Wide Channel Support
Amplifier Design		Direct Energy
Dynamic Audio Amplification
Non-Phase Shift Amplifier
VLSC (Vector Linear Shaping Circuitry)	All Channels
Optimum Gain Volume Circuitry
THX™ Certification	Select™ (previously known as Select2)
Continuous 6 Ω Rated
Certified 4 Ω Performance
Discrete Output Stage Circuitry
Independent Block Construction (Amp/Preprocessor)
Bi-amp Capability
BTL (Bridged Transless or Bridging)

AUDIO FEATURES	Onkyo TX-RZ920	Pioneer VSX-534D
Digital Signal Processing (DSP) Engine	32-bit Digital Signal Processing Engines	Digital Quad-Core 32-bit DSP (Cirrus Logic)
DAC	AKM AK4490 for Front L/R AKM AK4458 for Other Channels AKM AK4388 (x2) for Zone 2 and Zone 3	AKM AK4438
DAC Specs	384 kHz/32 Bit for Front L/R 768 kHz/32 Bit for Other Channels 192kHz/24 Bit for Zone 2 and Zone 3	384 kHz/32 Bit
Maximum Channel Processing	11.1	5.1
Air Studios Monitor Certification
Dolby Atmos
Dolby Atmos Height Virtualization
Dolby Atmos Music
Dolby TrueHD
Dolby Digital Plus
Dolby Surround Upmixer
Dolby Pro Logic
Dolby Digital EX
THX Listening Modes
Surround EX
DTS:X
DTS Neural:X
DTS Virtual:X
DTS Neo
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS 96/24
DTS Express
DTS-ES		Discrete 6.1, Matrix 6.1
IMAX Enhanced
Auro 3D with Auro-Matic Upmixer
PCM	2-ch/Multi-ch Input	2-ch/Multi-ch Input
Network Audio Formats	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, MPEG-4 AAC, LPCM
Music Playback via USB	FLAC, WAV, Apple Lossless, WMA, MP3, DSD, AIFF, AAC, Dolby TrueHD
High Resolution Music Playback via USB and/or Network	up to 192 kHz
High Resolution Audio Formats via USB	FLAC, WAV, Apple Lossless, DSD, AIFF, AAC, Dolby TrueHD
Gapless Playback
DSD via HDMI	2-ch/Multi-ch Input	2-ch/Multi-ch Input
DSD via USB	2-ch Input	2-ch Input
DSD to PCM Converter
USB DAC
Jitter Reduction	PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology for S/PDIF Audio
DTS Dialogue Control
Dialog Enhancement
Dialog normalization
Dialogue Lift
Sound Retriever		Advanced
Sound Retriever AIR
Digital noise Reduction
Tone Control	All Channels	All Channels
Compressed Music Enhancer	Advanced Music Optimizer (bluetooth included)	Advanced Sound Retriever
High-resolution Music Enhancer
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Audyssey LFC
Audyssey Sub EQ HT
Audyssey DSX
Phase-Matching Bass Boost
Direct Mode
Pure Audio Mode
Pure Direct Analog Path Mode
Pure Direct Mode
Auto Surround
Optimum Surround
Advanced Surround		10 + 1
Wide Surround
Front Stage Surround Advance
Headphone Surround
Virtual Speakers	T-D (Theater-Dimensional)
Virtual Depth

CALIBRATION	Onkyo TX-RZ920	Pioneer VSX-534D
Auto Speaker Calibration System with Mic.	AccuEQ with AccuReflex™	MCACC
Manual MCACC
MCACC Memory		1
Reflex Optimizer
Phase Control
Auto Phase Control Plus
Full Band Phase Control
Standing Wave Control
EQ Bands		9-Band
Symmetric EQ
Distance Adjustment		0.1 feet
Precision Distance
Polarity Check
Auto Subwoofer Crossover

VIDEO FEATURES	Onkyo TX-RZ920	Pioneer VSX-534D
HDR10
HDR10+
Dynamic HDR
BT.2020 color space
Dolby Vision
HLG (Hybrid Log Gamma)
HDBaseT Compatible
Enhanced Audio Return Channel (eARC)	via future firmware update
HDCP Version	2.2	2.2
QMS (Quick Media Switching)
ALLM (Auto Low Latency Mode)
VRR (Variable Refresh Rate)
QFT (Quick Frame transport)
3-D Ready
Video Signal Passthrough	up to 4K/60p (RGB/YCbCr4:4:4)	up to 4K/60p (YCbCr 4:4:4)
Video Signal Upscaling	1080p to 4K	1080p to 4K
Analog To HDMI Upconversion	Component**, Composite
Component Video Upscaling
Analog to Analog Video conversion
Component Video Maximum Resolution	480i/576i
Stream Smoother
Pure Cinema
Video Parameter Adjustments
Super Resolution
isf Certified Calibration Control

CONNECTIVITY	Onkyo TX-RZ920	Pioneer VSX-534D
Wi-Fi
Bluetooth	SBC, AAC	SBC, AAC
Works with Amazon Alexa
Google Assistant
Chromecast Built-In
Apple Siri
Works with SonoS	requires firmware update & Sonos Connect
DTS Play-Fi
MHL Input
DLNA 1.5
AirPlay	AirPlay 2 after firmware update
Apple Product Connection	iPod, iPhone and iPad
Remote App	Onkyo Remote App for iPod touch/iPhone and Android-Powered Devices
InstaPrevue Input Source Prevue

TERMINALS	Onkyo TX-RZ920	Pioneer VSX-534D
HDMI Inputs	8 (1 front)	4
HDMI Outputs	2 (1 Main, 1 Sub/Zone2)	1
8K Inputs
USB Input	1 (Rear)
USB DC Out Port
Optical Inputs	2	1
Optical Outputs
Coaxial Inputs	2	1
RCA Line Inputs	6	3
RCA Line Outputs
XLR Line Inputs
Phono Input
Multi-Channel Input
RCA Pre-Outs	11.2	0.2
XLR Pre-outs
Composite Video Inputs	2
Composite Video Outputs
S-Video Inputs
S-Video Outputs
Component Video Inputs	2
Component Video Outputs
Ethernet
Ethernet Switch
PC In
Front A/V Inputs	HDMI
Speaker A/B
Headphone Out	6.3 mm (1/4")	6.3 mm (1/4")
Detachable Power Cord
uport
adapterport

ZONES	Onkyo TX-RZ920	Pioneer VSX-534D
Number of Zones	3	1
Powered Zones	2 and 3
Zone 2 Outs	HDMI, RCA Pre/Line Out
Zone 3 Outs	RCA Pre/Line Out
Whole House Mode
RS-232C Interface
+12V Trigger Output	2 (A: 100 mA, B:25 mA)
Remote (IR) Input/Output	1 / 0	0 / 0

MISCELLANEOUS	Onkyo TX-RZ920	Pioneer VSX-534D
On-Screen Display	Graphical User Interface with Overlaid On-Screen Display (OSD) via HDMI with Quick Setup Function	User-Friendly GUI with System Setup Menu
GUI Languages		9
AV Navigator
IP Control
PreAmp Mode
Versatile Speaker Configuration		FRONT, CENTER, SURROUND/HEIGHT
FL Dimmer
ONKYO-RI System Control
RIHD (Remote Interactive Over HDMI)
Pre-Pro/Learning Remote	/
Smart Grid-Ready

RADIO	Onkyo TX-RZ920	Pioneer VSX-534D
Analog Tuner	FM/AM	FM with RDS
Presets	40	40
Digital Radio		DAB/DAB+
Internet Radio	TuneIn
Pandora
Spotify
Tidal
Deezer
Napster
SiriusXM

CONSTRUCTION	Onkyo TX-RZ920	Pioneer VSX-534D
Front Panel		Brushed
Solid Aluminum Front
Speaker Terminals	11	5
Large Speaker Terminals	11	2
Color-Coded Speaker Terminals
Transparent High-Grade Speaker Terminals
3D Space Frame Construction
Gold plated RCA terminals

POWER	Onkyo TX-RZ920	Pioneer VSX-534D
Power Supply	AC 120 V, 60 Hz	AC 220-240 V, 50/60 Hz
H.C.P.S. (High Current Power Supply)	Customized High-Output Transformer
Toroidal Transformer
Low Leakage Flux Power Transformer
Transformer Stabilizer
Power Consumption	310 W	465 W
No Sound Power		34.2 W
Standby Power	0.1 W	0.2 W
Capacitor Bank	15,000 µF
ECO Mode / Hybrid Standby Function

PHYSICAL	Onkyo TX-RZ920	Pioneer VSX-534D
Dimensions (W x H x D)	435 mm x 201 mm x 453 mm 17-1/8" x 7-15/16" x 17-13/16"	435 mm x 148 mm x 321 mm 17-1/8" x 5-13/16" x 12-5/8"
Dimensions of Package (W x H x D)		525 mm x 230 mm x 390 mm 20-11/16" x 9-1/16" x 15-3/8"
Weight	16.3 kg (35.9 lbs)	8 kg (17.6 lbs)
Weight of Package		10.5 kg (23.1 lbs)

SPECIFICATIONS	Onkyo TX-RZ920	Pioneer VSX-534D
Power Output (8 Ω, 20 Hz - 20 kHz, 2 channel driven, FTC)	135 W (0.08% THD)
Power Output (6 Ω, 1 kHz, 1 channel driven, FTC)	175 W (0.9% THD)
Maximum Effective Power Output (6 Ω, 1 kHz, 1 channel driven, JEITA or IEC)	250 W (10% THD)	150 W (10% THD)
Rated Power Output (6 Ω, 1 kHz, 1 channel driven, IEC)		135 W (1% THD)
Dynamic Power per Channel (3 Ω, Front)	320 W	160 W
Dynamic Power per Channel (4 Ω, Front)	270 W	125 W
Dynamic Power per Channel (8 Ω, Front)	160 W	85 W
THD	0.04% (1 kHz, 100 W, 8 Ω)	0.08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance (Line)	200 mV/82 kΩ	200 mV/47 kΩ
Input Sensitivity and Impedance (Phono MM)	3.5 mV/47 kΩ
Rated Preout Level and Impedance	1 V/330 Ω
Rated Headphone Jack Output Level and Impedance	43 Ω	8 Ω - 600 Ω
Rated Headphone Power Output	55 mW (32 Ω, 1 kHz, 10% THD)	80 mW (32 Ω, 1 kHz, 10% THD)
Phono Overload	70 mV (MM, 1 kHz 0.5%)
S/N Ratio (Line, IHF-A)	107 dB	109 dB
S/N Ratio (Phono MM, IHF-A)	90 dB
Frequency Response (Analog In)		10 Hz - 100 kHz/+1 dB, -3 dB (Pure Audio)
DSD Sampling Rates via HDMI	2.8 MHz	2.8 MHz
DSD Sampling Rates via USB	2.8 MHz, 5.6 MHz, 11.2 MHz
Video Input Sensitivity/Output Level and Impedance	1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)
Ethernet Standard	10BASE-T/100BASE-TX
Wi-Fi Standard	IEEE 802.11 a/b/g/n
Wi-Fi Terminal Frequency	5 GHz, 2.4 GHz
Bluetooth Version	4․1 + LE	4․2
Bluetooth Frequency	2.4 GHz	2.4 GHz
USB Terminal	Ver. 2.0, 5 V, 1 A
FM Frequency	87.5 MHz - 107.9 MHz	87.5 MHz - 108.0 MHz
FM 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)		Mono: 1.0 µV (11.2 dBf)
AM Frequency	530 kHz - 1710 kHz
Warranty	3 Years	1 Year Parts & Labor

* - 480i/576i and 480p/576p only
** - 480i/576i only
*** - no 1080p/24 upconversion
**** - 1080p signal is not converted